欢迎光临东莞九安电子科技有限公司官方网站!
联系我们 / 客诉反馈表 / 返回首页 / ENGLISH
新闻资讯
联系我们

东莞九安电子科技有限公司

地址:东莞万江水蛇涌美库产业园B4

电话:0769-22287912

传真:0769-22287167

全国服务热线: 400-072-1352 

服务邮箱:qx@tiremagic.cn

    站:www.tiremagic.cn 

主 营:胎压监测、胎压监测器
4行业动态

Car Scratches Repair 10 Tips


ll the cars have abrasions, Zhejiang auto parts manufacturing the best repair method is to fill the same part of the scar with the body of the same coating agent. Coating agent can be coated once, twice, three times, the more the number will be painted more clean. But the whole body of the uniform treatment is also very important.

Small scar repair repair tips

If the body found scars, first check the extent of the wound. If only a very shallow scratch paint, auto parts manufacturers immediately with a mixture of treatment, wipe the method for a straight line to wipe. After the scars disappear, wipe with a finer mixture and then wax it.

Scratch, paint off the repair and maintenance tips

Deep scars, the focus is to observe whether the metal surface is exposed, if you do not see the metal surface will not rust, you can concentrate on coating modified paint. With the pen tip a little bit up, and then finish the paint completely dry.

Deep scar repair repair tips

Very deep but slender scars, with colored putty can be repaired very well. Scar with sandpaper, do not casually expand the wound surface, it is important to remove the dirty clean. The putty should be carefully applied so that it is completely inside. Finally coated with a mixture, waxed, the end of the work.

[返回]   
Copyright © 2017-2018 东莞九安电子科技有限公司 版权所有   备案号:粤ICP备16090754号-1
全国服务热线: 400-072-1352      座机电话:0769-28821026    传真:0769-22287167
地址: 东莞万江水蛇涌振兴路117号美库产业园B栋4楼     邮箱:qx@tiremagic.cn